Hardboard - 3.5mm

Hardboard - 3.5mm
  • Click to enlarge
  • Click to enlarge
Cutting Required (Red Lines)
Line Engraving (Blue Lines)
Raster Engraving (Black Lines and Fills)

£5.00


Product Information
Specification

Hardboard also called high-density fiberboard (HDF), is a type of fiberboard, which is an engineered wood product. It is similar to particle board and medium-density fiberboard, but is denser and much stronger and harder because it is made out of exploded wood fibers that have been highly compressed.  Note: Hardboard has one smooth shiny (sealed) surface, the back face is untsealed.

Finishing

For internal use edges can be left unfinished. For external use / internal use where exposed to moisture painting or varnishing is recommended.

Cutting Edges / Cleaning

Cut / Etched parts will have some burn marks from the laser process. These marks can usually be removed using methylated spirits. Alternatively via a light sanding with fine grit paper.

Cutting Offsets (kerf width / laser cut line width)

3.5mm thick material = approx. 0.1mm

Cutting Sizes

150mm x 150mm

300mm x 300mm

600mm x 600mm

(sizes upto 900mm x 1.2m on request)

Design File
 
(dxf, dwg, ai, cdr, eps, slddrw, svg, zip, rar, tar, jpg, jpeg, png, gif, bmp).  If it is a repeat order to existing artwork you can skip this step [clarify via the comments field]).
 
Uploaded designs to be formatted in accordance with our design requirements, or start by select one of our standard templates.
Product Code HRDB
Manufacturer Laser Lab
Condition New
Weight 0.100kg


Customer Reviews

This product hasn't been reviewed yet.

Write a review

Write Review

Verify you are a human

Please enter a valid email address.
This field is required.
Top

eCommerce by CubeCart